FST
FST
◆ According to NFPA20,centrifugal pump shall be of the overhung impeller design with close or separate coupled end suction type
◆ Pump capacities are based on the calculated system demand
◆ Fire pump shutoff head should not exceed 140% of the nominal value
◆ Recommended the maximum system demand flow correlate to a point on pump curve between 90% to 140% of the pump capacity
Technical Data
| MODEL MODELO MODELE |
DN | Power Potencia Puissance |
Q=DELIVERY/CAUDAL/DEBIT | |||||||||||||||
| GPM 0 | 25 | 50 | 75 | 100 | 120 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | ||||
| I/min 0 | 95 | 190 | 283 | 383 | 450 | 567 | 750 | 950 | 1133 | 1317 | 1517 | 1700 | 1900 | 2267 | ||||
| m³/h 0 | 5.7 | 11.4 | 17 | 23 | 27 | 34 | 45 | 57 | 68 | 79 | 91 | 102 | 114 | 136 | ||||
| mm | kw | hp | H=Head/Altura/Hauteur(m) | |||||||||||||||
| FST32-250/55 | 50×32 | 5.5 | 7.5 | 60 | 60 | 58 | 52 | 39 | – | – | – | – | – | – | – | – | – | – |
| FST 32-250/75 | 50×32 | 7.5 | 10 | 69.5 | 69.5 | 68 | 64 | 56 | – | – | – | – | – | – | – | – | – | – |
| FST 32-250/92 | 50×32 | 9.2 | 12.5 | 75 | 75 | 73.5 | 70 | 61 | – | – | – | – | – | – | – | – | – | – |
| FST32-250/110 | 50×32 | 11 | 15 | 90 | 89 | 86 | 80 | 69 | – | – | – | = | – | – | – | – | – | – |
| FST 32-250/150 | 50×32 | 15 | 20 | 97 | 96.8 | 94 | 88 | 76 | – | – | – | – | – | – | – | – | – | – |
| FST32-250/55D | 50×32 | 5.5 | 7.5 | 79.5 | 76 | 69 | 58 | 42 | – | – | – | – | – | – | – | – | – | – |
| FST32-250/75D | 50×32 | 7.5 | 10 | 95 | 94 | 88 | 78 | 62 | – | – | – | – | – | – | – | – | – | – |
| FST40-250/92 | 65×40 | 9.2 | 12.5 | 64 | – | – | 60 | 57 | 55 | 51 | 42 | – | – | – | – | – | – | – |
| FST 40-250/110 | 65×40 | 11 | 15 | 72 | – | – | 68 | 66 | 63.5 | 59 | 50 | – | – | – | – | – | – | – |
| FST40-250/150 | 65×40 | 15 | 20 | 84.5 | – | – | 79.5 | 77.5 | 75.2 | 71.5 | 63 | – | – | – | – | – | – | – |
| FST 40-250/185 | 65×40 | 18.5 | 25 | 90 | – | – | 86 | 83.5 | 80.7 | 77 | 68 | – | – | – | – | – | – | – |
| FST 50-250/150 | 65×50 | 15 | 20 | 68.5 | – | – | – | – | – | 65 | 62 | 58 | 53 | 45 | – | – | – | – |
| FST 50-250/185 | 65×50 | 18.5 | 25 | 79 | – | – | – | – | – | 77 | 74 | 71 | 66 | 59 | 47 | – | – | – |
| FST 50-250/220 | 65×50 | 22 | 30 | 89.5 | – | – | – | – | – | 88 | 85 | 81.5 | 76 | 68 | 57 | – | – | – |
| FST 65-250/220 | 80×65 | 22 | 30 | 64.8 | – | – | – | – | – | – | – | 63.5 | 62 | 61 | 58.5 | 56 | 52.5 | – |
| FST65-250/300 | 80×65 | 30 | 40 | 80 | – | – | – | – | – | – | – | 79 | 78 | 77 | 74.5 | 72 | 70 | 59 |
| FST 65-250/370 | 80×65 | 37 | 50 | 92 | – | – | – | – | – | – | – | 89.5 | 88.5 | 87 | 85 | 83 | 80 | 69 |
| MODEL MODELO MODELE |
DN | Power Potencia Puissance |
Q=DELIVERY/CAUDAL/DEBIT | |||||||||||||
| GPM 0 | 250 | 400 | 500 | 600 | 750 | 850 | 950 | 1000 | 1250 | 1350 | 1500 | 1750 | ||||
| I/min 0 | 950 | 1517 | 1900 | 2267 | 2833 | 3217 | 3600 | 3783 | 4733 | 5100 | 5683 | 6617 | ||||
| m³/h 0 | 57 | 91 | 114 | 136 | 170 | 193 | 216 | 227 | 284 | 306 | 341 | 397 | ||||
| mm | kw | hp | H=Head/Altura/Hauteur(m) | |||||||||||||
| FST65-250/450 | 80×65 | 45 | 60 | 102 | 98 | 94.5 | 90 | 83 | – | – | – | – | – | – | – | – |
| FST65-250/550 | 80×65 | 55 | 75 | 122 | 120 | 114.5 | 111 | 104 | 85 | – | – | – | – | – | – | – |
| FST65-250/750 | 80×65 | 75 | 100 | 141 | 141 | 134.5 | 132 | 123 | 105 | 86 | 64 | – | – | – | – | – |
| FST65-250/900 | 80×65 | 90 | 125 | 151 | 150 | 144.5 | 141 | 133 | 115 | 95 | 74 | – | – | – | – | – |
| FST80-200/370 | 100×80 | 37 | 50 | 71.5 | 70.9 | 70.5 | 66 | 62 | 54 | 46 | 37 | – | – | – | – | – |
| FST80-200/450 | 100×80 | 45 | 60 | 88 | 86.7 | 86 | 84 | 80 | 72 | 62 | 49 | – | – | – | – | – |
| FST80-200/550 | 100×80 | 55 | 75 | 94.5 | 94.5 | 94.5 | 92 | 89 | 82 | 76 | 66 | – | – | – | – | – |
| FST80-250/450 | 100×80 | 45 | 60 | 85 | 84 | 82.6 | 82 | 78 | 72 | 64 | 52 | – | – | – | – | – |
| FST80-250/550 | 100×80 | 55 | 75 | 98 | 97 | 95.6 | 95 | 92 | 86 | 78 | 67 | – | – | – | – | – |
| FST80-250/750 | 100×80 | 75 | 100 | 124 | 123 | 121.6 | 119 | 116 | 110 | 103 | 94.5 | 89 | – | – | – | – |
| FST80-250/900 | 100×80 | 90 | 125 | 144 | 143 | 141.6 | 140 | 137 | 130 | 122 | 114 | 108 | – | – | – | – |
| FST100-200/450 | 125×100 | 45 | 60 | 65 | 65 | 64 | 63 | 62 | 58.5 | 56 | 53 | 51 | 39 | 33.5 | – | – |
| FST100-200/550 | 125×100 | 55 | 75 | 77 | 76 | 75.5 | 76 | 75 | 73 | 72 | 70 | 70 | 62.3 | 59 | – | – |
| FST100-200/750 | 125×100 | 75 | 100 | 91 | 91 | 90.5 | 89.7 | 88 | 86 | 84 | 82 | 81 | 71.7 | 68.5 | 56 | – |
| FST100-200/900 | 125×100 | 90 | 125 | 100 | 100 | 99.5 | 98 | 97 | 95 | 93 | 91 | 90 | 80.7 | 77.5 | 65 | – |
| FST100-250/750 | 125×100 | 75 | 100 | 80 | – | – | 78 | 78 | 76 | 74 | 73 | 72 | 66 | 64 | 56 | – |
| FST100-250/900 | 125×100 | 90 | 125 | 100 | – | – | 98 | 98 | 96 | 94 | 93 | 92 | 86 | 84 | 77 | – |
| FST100-250/1100 | 125×100 | 110 | 150 | 118 | – | – | 116 | 115.5 | 114 | 112 | 111 | 110 | 104 | 102 | 95 | – |
| FST100-250/1320 | 125×100 | 132 | 180 | 129 | – | – | 127 | 126 | 124 | 123 | 122 | 121 | 115 | 112 | 105 | – |
| FST100-250/1600 | 125×100 | 160 | 220 | 148 | – | – | 146 | 145 | 144 | 142 | 141 | 140 | 134 | 132 | 125 | – |
| FST125-200/550 | 150×125 | 55 | 75 | 70 | – | – | 67 | 66.5 | 65 | 63.5 | 61.5 | 60.5 | 54 | 50.5 | – | – |
| FST125-200/750 | 150×125 | 75 | 100 | 80 | – | – | 77 | 76 | 74.5 | 73 | 72 | 71 | 67 | 65 | 60 | – |
| FST125-200/900 | 150×125 | 90 | 125 | 87 | – | – | 84 | 83 | 81.5 | 80 | 78.5 | 78 | 73.5 | 71.5 | 67.5 | 60 |
Material Description
Performance Curve
Downloads
No data was found
Fill the form
Request a Quote
Looking for a custom solution to meet your specific needs? We can help! Simply fill out the form below to request a quote for our services. We’ll work with you to create a tailored plan that fits your budget and achieves your desired results.
Call us
+1 (514) 550 5578
Email us
sales@niagarapumps.ca